How Reinforced Barbed Tape Can Be Used For Fencing
Barbed & Fencing Wire Contractors in Gurgaon, Fence Installation Services in Delh. The ideal arrangement is to have the Angel Iron or cement pillar posts approximately 4 meters, apart and fix Reinforced Barbed tape in seven lines, the top three at eight inches interval and the lower four at six inches interval, giving an effective height of four feet from the base. Between every two posts, two vertical lines of Reinforced Barbed tape, at approx one meter interval should be fixed. Each vertical line will require approx. 1.25 meters of Reinforced Barbed Tape.
To cover one KM periphery the total length of Reinforced Barbed Tape required will be 7000 meters plus 835 meters (vertical lines) in gross 7835 meters say approx 8000 meters.
One kilogram of Reinforced Barbed Tape (0.52 mm thickness) will measure approx 12 meters. Hence in terms of weight 656 kgs of Reinforced Barbed Tape is sufficient to cover one kilometer fencing of 4 feet height.
Apart from having sharp barbs practically at every half inch and being far less prone to sagging, the additional advantage of this type of fencing is that it has a flat surface on both sides. Keeping in mind the adverse climatic conditions, one could paint both sides with anti corrosive red oxide or bituminized black paint in addition to zinc coating already provided.
This would double the life of Reinforced Barbed Tape and save reparative cost.
This is the most recent concept in fencing and barricading. It is the ultimate replacement of conventional barbed wire.
Installation of RBT & PTCC
The best way to erect security fence Reinforced Barbed Type (RBT) is to lay it on angle iron or cement pillar post approximately 3 - 4m apart with horizontal clearance between each RBT stand 250mm RBT can be fixed on angel iron or cement pillar post using rivets, J clips, split pins etc.
Security fence with Punched Tape Concertina Coil could be erected in many ways.
It could be laid directly on the ground by grouting spikes provided at each in a single or multiple rows depending upon level of security desired. It could be laid on the existing boundary walls using V shaped angle
Punched Tape Concertina Coil (PTTC) are tailored made to suit individual requirements.
|* +/- 5%|
Punched Tape Concertina Coil Feature